Leveling the column

As part of the assembly of your Nutritower, you may need to level the column portion of the tower. A few reasons can cause the tower to tilt or lean by 1 or 2 degrees, but this can easily be adjusted. Here are the steps to follow if you have a leaning tower:

  1. Loosen all four screws that hold the column to the base by a half-turn, or enough that the column can move with a slight resistance against the screws.
  2. Level the column. This is made easier with a second person to hold the column straight while you evaluate that it is level from a few feet away.
  3. Start by tightening the screws opposite to the direction of the lean until tight.
  4. Follow with the opposite side screw and continue until all screws are secured.

 

Your tower is now level! 

 

f you require any additional information, please reach out directly at info@nutritower.com and we will be happy to assist you directly!

 

Nutritower support team.

 

 

 

 

 

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk